SAMSON 0430-1976 V-Ring Packing DN 15–80 for Industrial Control Valves
The SAMSON 0430-1976 V-Ring Packing is a replacement valve stem sealing component designed for compatible SAMSON industrial control valves in the DN 15–80 nominal size range.
- V-Ring Packing Configuration
- DN 15–80 Nominal Valve Size Range
Need help applying this product? Our engineers can help select the right equipment and design a system around your requirements. Request a quote or discuss your application with us.
Need help choosing? Send us the part number or your operating data — talk to an engineer or see full specifications.
- Fast dispatchAustralia & worldwide
- Technical supportTalk to an engineer
- 1 YearWarranty
Product Overview
The SAMSON 0430-1976 V-Ring Packing is a replacement valve stem sealing component designed for compatible SAMSON industrial control valves in the DN 15–80 nominal size range. This packing helps maintain a reliable seal around the moving valve stem, reducing external leakage of process media through the valve bonnet. Its V-ring sealing arrangement is intended to support controlled linear stem movement while preserving sealing integrity during normal valve operation.
Designed for industrial valve servicing and maintenance, the SAMSON 0430-1976 packing is suitable for replacing worn, damaged, or deteriorated stem packing in correctly matched control valve assemblies. V-ring packing systems use shaped sealing elements held within the packing chamber, where compression and valve design help establish a seal around the stem. Proper selection and installation contribute to dependable valve operation, reduced maintenance-related leakage, and reliable process containment. Related SAMSON packing references include 0430-0420, 0430-0618, 0430-1980, and 0430-0404, although these should be treated as separate part numbers until their specifications and compatibility are verified.
Technical Specifications
|
Specification |
Value |
|---|---|
|
Product Name |
V-Ring Valve Stem Packing |
|
Brand |
SAMSON |
|
Manufacturer |
SAMSON AG |
|
Main Part Number |
0430-1976 |
|
Product Type |
Valve Stem Packing |
|
Component Category |
Industrial Control Valve Spare Parts |
|
Packing Configuration |
V-Ring |
|
Nominal Valve Size Range |
DN 15–80 |
|
Sealing Application |
Control Valve Stem Sealing |
|
Operating Principle |
Compression-Based Mechanical Sealing |
|
Valve Stem Movement |
Linear |
|
Installation Location |
Valve Bonnet Packing Chamber |
|
Primary Function |
Reduction of External Stem Leakage |
|
Replacement Application |
Worn or Damaged Valve Stem Packing |
|
Compatible Equipment |
SAMSON Control Valves with Matching Packing Specification |
|
Related Part Numbers |
0430-0420, 0430-0618, 0430-1980, 0430-0404 |
|
Working Medium |
Process Fluids Compatible with the Specified Packing |
|
Application Scope |
Industrial Control Valve Maintenance and Repair |
|
Condition |
New |
|
Warranty |
1 Year |
Key Features
-
V-ring packing design for sealing compatible industrial control valve stems.
-
Identified by SAMSON replacement part number 0430-1976.
-
Listed for DN 15–80 control valve sealing applications.
-
Helps reduce external process fluid leakage around the valve stem.
-
Supports controlled linear valve stem movement within the packing chamber.
-
Suitable for restoring sealing performance during valve maintenance.
-
Designed for use in correctly matched SAMSON valve assemblies.
-
Helps maintain the integrity of the valve bonnet sealing arrangement.
-
Suitable for preventive maintenance and industrial equipment refurbishment.
-
Replacement component for deteriorated or mechanically damaged packing.
-
Supports dependable control valve operation when correctly installed.
-
Can be incorporated into planned industrial shutdown and servicing programmes.
-
Part-number identification supports accurate maintenance procurement and spare-parts management.
-
Suitable for industrial applications requiring properly specified valve stem sealing.
Typical Applications
-
SAMSON industrial control valve maintenance
-
Globe valve stem packing replacement
-
Industrial valve bonnet sealing
-
Chemical and petrochemical processing facilities
-
Oil and gas production and processing plants
-
Power generation and utility systems
-
Water and wastewater treatment facilities
-
Industrial manufacturing systems
-
Process control valve refurbishment
-
Valve stem leakage repair
-
Industrial fluid handling equipment
-
Preventive maintenance and plant shutdown servicing
Shipping & Support
-
Fast dispatch – Australia & Worldwide Shipping
-
Technical assistance available
-
1-year warranty
// Your history
Recently viewed
How do I find the right part for my system?
Three options. Search by part number if you have the OEM code from Parker, Danfoss, Linde, Kawasaki, Kayaba or Grundfos — our search recognises both manufacturer codes and aftermarket cross-references. Browse by category if you know the component type (pumps, valves, cylinders, etc.). Or send a spec sheet to our engineering desk and we'll cross-reference against our 3,000+ SKU catalogue within one business day.
Can you help me size a pump or valve for my application?
Yes — sizing support is included with every order. Send us your operating pressure, flow rate, viscosity, drive speed and duty cycle, and our engineers will recommend a suitable component from our catalogue with full datasheets. We don't custom-build parts ourselves, but we can spec the right OEM component for almost any standard industrial application.
Can you cross-reference a discontinued part?
Yes — cross-referencing is one of the things we do most. Send us the original part number (even if the manufacturer has dropped it) and our engineering desk will identify a current equivalent or compatible alternative. Cross-reference lookups are free and typically come back within 4 business hours.