// Catalogue

Skid Mounted Systems: Skid Mounted HPUs, Pumps and Filtration Units

Skid mounted systems put hydraulic power units, pumps, filtration units and other equipment on one rugged frame, to install fast and move easily. TSA Hydraulics Engineering supplies them within the Skid Systems family of our Systems range, alongside Pump Skid Systems, Process Pump Skids, Fire Pump Skids, Duty / Standby Skids, Custom Skids and Packaged Systems & Skids.

A skid isn’t portable just because it has a frame. It needs forklift pockets, rated lifting points and pipework that won’t crack when the frame flexes on a truck. We design for the move too. Send your equipment list and site plans for genuine or equivalent parts, shipped fast from Sydney.

1product

// Buying guide

What Goes on a Skid-Mounted System

Hydraulic power units: motor, pump, tank, valves and filters for machines and test rigs.
Pump sets: transfer, dewatering or circulation pumps with their own driver.
Filtration units: offline filters that clean hydraulic and lube oil while machines run.
Vacuum pump sets: pumps, receivers and controls for process and handling duties.
Cooling units: pumps and oil coolers for hot hydraulic circuits.

If you want controls and instruments fully wired and tested as one unit, see packaged systems & skids.

Built to Be Moved

Forklift pockets on the base, sized for the full weight.
Lifting lugs or a lifting frame with a rated load.
Tie down points for road transport.
Flexible hoses at site connections, so the frame can settle.
Bracing on pipework and panels to handle vibration in transit.
A drip tray under oil filled equipment.

Fixed or Relocatable?

A fixed skid gets bolted and grouted once, then stays. It can use rigid pipework and heavier frames.

A relocatable skid moves between sites, shutdowns or hire jobs. It needs quick connect couplings, protected instruments and a frame that stays square after many lifts. Tell us which one you need before we design it.

Where Skid Mounted Systems Work

Mining shutdowns and temporary process plant.
Construction dewatering and bypass pumping.
Hydraulic test benches and workshops.
Oil flushing and filtration during commissioning.
Hire fleets that need tough, repeatable units.

For critical supply, two pumps can share one frame, as on our duty / standby skids. Unusual equipment or tight layouts go through custom skids.

Moving a Skid Safely

Drain or secure fluids before the lift.
Cap all open ports and protect instruments.
Lift only from the marked points.
Strap the skid down at the tie down points.
Check alignment, fittings and fluid levels before restarting on the new site.

Looking After a Mobile Skid

Inspect the frame and welds for cracks after each move.
Check hoses for chafing at clamps and edges.
Change filters and test the oil more often on dusty sites.
Recheck pump and motor alignment after transport.

Skid Mounted Systems Specifications to Check

Equipment on board and its duty
Frame size, weight and lifting arrangement
Power supply, or diesel or petrol drive
Connection types: fixed or quick connect
Protection rating for outdoor use
Transport limits: width, height and weight

Why Buy From TSA Hydraulics Engineering

As a skid-mounted systems supplier, we design the frame, lifting and pipework for how the skid will really be used, then build with trusted fabrication partners. You get clear prices in AUD, OEM or equivalent components, and help sourcing skid-mounted systems replacement parts such as pumps, filters, hoses and seal kits. We tell you upfront which parts are genuine and which are equivalents.

// FAQs