// Catalogue
Similar products
// Buying guide
Types of Process Pump Skid
- Chemical dosing skids: metering pumps that add precise amounts of chemical to water or process streams.
- Transfer skids: moving product, solvents or intermediates between tanks and process lines.
- Clean in place (CIP) supply skids: delivering cleaning and rinse solutions at the right flow and temperature.
- Blending and mixing skids: combining two or more streams in a set ratio.
- Recirculation and filtration skids: keeping tank contents moving, clean or at temperature.
- You’ll find them in water treatment, food and beverage, and chemical plants.
Matching the Pump to the Process
- Diaphragm metering pumps: accurate dosing of chemicals, acids and caustics.
- Peristaltic pumps: abrasive, shear sensitive or very corrosive fluids, with only the hose in contact.
- Lobe pumps: gentle, hygienic transfer for food and beverage products.
- Progressive cavity pumps: thick, lumpy or shear sensitive fluids at steady flow.
- Centrifugal pumps: clean, thin liquids at higher flows.
For general water and utility duties, pump skid systems are the simpler fit. Critical dosing lines often move to duty / standby skids, and site fire protection belongs on fire pump skids.
Materials and Seals
- 316 stainless steel: for food, beverage and many chemicals.
- PVC, PVDF and polypropylene: for acids, hypochlorite and other aggressive chemicals.
- Seals and gaskets in EPDM, FKM or PTFE: chosen to suit the chemical and temperature.
- Polished or hygienic finishes where the product touches the surface.
The fluid decides the materials, and getting them wrong can fail a skid in weeks.
Instruments and Control
- Flow meters or calibration columns to prove the dose rate.
- Pressure relief valves and pulsation dampers on metering lines.
- Level sensors on supply tanks, with low level alarms.
- A local panel, or signals to your PLC or SCADA system.
A calibration column lets operators check the real dose in a minute, rather than trusting the number on the pump.
Safety on Process Skids
- Bunding or drip trays sized to hold a leak.
- Splash guards around pumps and flanges handling chemicals.
- Leak detection in the bund for unattended sites.
- Hazardous area-rated motors and instruments where solvents are handled.
From Process Data to Delivered Skid
- Review the fluid data sheet, dose rate and injection point.
- Select the pumps, materials and instruments.
- Approve the P&ID and general arrangement drawing.
- Build with our fabrication partners, then test where possible.
- Deliver, commission and calibrate on site.
Process Pump Skids Specifications to Check
- Fluid, concentration, temperature and viscosity
- Flow or dose rate and turndown
- Discharge pressure and injection point conditions
- Wetted materials, seals and finishes
- Instruments, controls and communications
- Bunding, frame size and site standards
Why Buy From TSA Hydraulics Engineering
As a process pump skids supplier, we choose the pump, materials and instruments for your fluid first, then build with trusted fabrication partners. You get clear prices in AUD, OEM or equivalent components, and help sourcing process pump skids replacement parts such as diaphragms, hoses, seals and valve kits. We tell you upfront which parts are genuine and which are equivalents.