// Catalogue

Pump Systems for Sprinklers and Hydrants

Fire protection systems rely on pumps to deliver water at the right pressure to sprinklers, hydrants, deluge systems and hose reels, the moment they’re needed. TSA Hydraulics Engineering supplies fire pumps, pump sets and parts within the Building & Civil group of our Industries range, alongside Agriculture/Irrigation, HVAC / Building Services, Construction/Dewatering, Flood Control and Residential/Light Commercial.

A fire pump has one job, done once, with no warning. Everything else is about making sure that once goes right: the right pump, a reliable driver and regular testing. Send your system details and fire engineer’s duty for genuine or equivalent parts.

// Buying guide

Where Fire Pumps Are Needed

Fire pumps boost water supply where town mains can’t deliver enough pressure or flow on their own. High-rise buildings need them to reach upper floors. Warehouses and factories need high flows for large sprinkler systems. Industrial sites, fuel depots and mines run their own fire water rings, often from storage tanks. Rural properties and remote sites rely on fire pumps to draw from tanks and dams, especially in bushfire areas.

Systems That Depend on Pumps

Sprinkler systems need steady pressure across every head that might open. Hydrant systems need high flow for firefighters to connect to. Deluge and foam systems on industrial sites need large volumes all at once. Hose reels and small systems may run from booster pumps. Each system has its own flow and pressure, and the pump set must be designed around the fire engineer’s numbers, not picked from a catalogue.

What a Fire Pump Set Includes

Main fire pump: usually an end suction or split case centrifugal pump.
Driver: electric motor, diesel engine, or one of each.
Jockey pump: holds system pressure and covers small leaks.
Controllers: start the pumps automatically when pressure drops.
Test line and valves: prove flow and pressure during routine testing.

Testing and Maintenance

Fire pumps must be tested regularly to prove they’ll work. In Australia, routine service of fire protection systems usually follows AS 1851, with run tests, flow tests and inspections at set intervals. Diesel engines need fuel, battery and coolant checks. Jockey pumps that start too often point to leaks that need finding. Licensed fire services contractors normally carry out and certify this work, and we support them with pumps, parts and technical help.

Bushfire and Rural Fire Pumps

Rural homes, farms and remote sites often keep water tanks for fire fighting. Portable and fixed fire pumps, usually petrol or diesel driven, draw from tanks and dams so a property can defend itself when mains power fails. Pumps need to start easily after months of rest, so regular test runs are essential.

Related Building & Civil Sectors

Fire protection works alongside other building and civil systems. Building plant rooms and booster sets are covered under HVAC / building services, temporary site fire water under construction/dewatering, and stormwater pumping under flood control.

What We Need From You

The type of system: sprinklers, hydrants, deluge or rural.
The fire engineer’s flow and pressure, if available.
Driver preference: electric, diesel or both.
Existing pump and controller details for replacements.

Why Work With TSA Hydraulics Engineering

We supply fire pumps, jockey pumps, controllers and parts, and work alongside fire engineers and fire services contractors. You get honest advice on genuine versus equivalent parts, and fast help when a test fails or a pump needs replacing.

// FAQs